SRK/SSH Series
- By locating the flow passage between the left and right radial ball bearings, thrust load caused by fluid pressure is not applied to the bearings. Thus, it is possible to use the product in a high-pressure range, with small variations in dynamic torque due to pressure changes.
- O-rings (with back-up rings) are used as main seals, providing stable seal performance in a range of low to high pressure.
※Flange-type joints (SRK-2F and 3F) can also be manufactured upon request. Please inform the flange specifications.
| Max. Pressure |
SSH10A to 25A 20.6MPa |
| Max. Temperature | 100 degrees C (212 degrees F) |
| Material (main parts) | SRK Carbon steel SSH Stainless steel |
| Standard Main Seal | O-ring (NBR) |
| Connection | Taper thread (Rc) |
