Products Description
Tubular heaters are produced using Incoloy, stainless steel or Copper sheath materials and also there is huge variety of selection of termination styles available. Insulation of Magnesium offers greater heat transfer.Industrial tubular heating elements are highly adaptable to most applications where electrical heating is required. They can be used in their straight form or bent into various shapes.
Name
Water Immersion Boil Tubular Flange Heater
Heat intensity
Not exceeding 30W/cm2 (advisable)
Power
Depends on the dimension
Insulation (when cold)
5 Min Ohmios 500 Watts minimum
Power tolerance (w)
5 % – 10 %
Working temperature
750ºC max.
Certification
ISO9001, CE
Delivery date
7-15 working days after payment
Warranty
1 year
The sheath material type of a tubular heater depends on the operating temperature and the corrosivity of the medium within which the heater will operate. The watt density distribution on the surface of a tubular heater is critical for two reasons. First it determines the temperature that a heating element sheath will attain within the conditions that the heater is subjected to. The second reason is that every material has a specific maximum watt density that it can tolerate during its heating cycle.
The MgO insulation used in tubular heating elements is compacted by reducing the element diameter in a roll reducing mill. The elements are then annealed in a controlled atmosphere furnace to relieve the metal stressing (work hardening) that takes place during the rolling to size reduction of the sheath. Annealing brings the metal back to a soft state, allowing the element to be bent into virtually any configuration. However, since forming also work hardens the metal, some precautions must be observed in order to prevent the sheath from breaking during bending or developing stress cracking marks.
1.We offer standard as well as customized models
2.We offer different tube diameters like 6 mm, 8 mm, 11 mm, 12.5mm, 16mm & 18mm
3.We offer different sheath materials. It can be availed in different materials like Incoloy 800, SS 304, SS 321, SS 316, Copper & Titanium
4.We offer various shapes as customer demand:immersion heater with flange or screw, explosion proof heater
5.Various terminal options are available
6.Various shapes and sizes are available
7.Durable and has longer life
Usual Applications:
1. Forced air heating
2. Thermal forming machines
3. Direct immersion in liquids
4. Comfort radiant heaters
5. Welded, brazed or clamped to tanks and pipes
6. Combination radiant and convection heater for oven and dryers
Accept customizing development, When inquire please specify
(1). Type of Heater
(2). Wattage and Voltage
(3). Dia & length of the heater
(4). Drawing or Sample required for special configuration
