Features
The newly developed D.I.C. II circuit control * not only ensures stable ion balance, but also prevents degradation of static electricity removal performance. Maintenance frequency has also been significantly reduced.
Because it is a DC type, it generates a significantly larger amount of ions, enabling high-speed static elimination.
Equipped with an alarm output as standard, it can quickly output warnings such as cleaning warnings and high voltage abnormality warnings to the outside, indicating deterioration of the ionizer’s characteristics or an abnormality.
The ion balance can be finely adjusted to keep the potential at the static elimination location at zero volts.
*D.I.C. (Double Ion Control) circuit control is a circuit that can always eliminate static electricity in the optimal state by simultaneously controlling both the ion balance and the amount of ion generation.
specification
format ND-503T
Ion generation method DC corona discharge type
discharge electrode needle tungsten
Recommended Air Pressure 0.02 to 0.15 MPa
Air Consumption 45 to 105 L/min
Ozone generation amount 0.02ppm or less (300mm)
environment Temperature: 0 to 40°C, humidity: 80% or less (no condensation)
Power Input AC100V 50/60Hz
power cable Approx. 2.8m (power cable with ground terminal)
Power consumption 4VA
mass 1.5kg
Change in static electricity removal performance over time
ND-503T_03.gif
Ion balance and static electricity removal characteristics
ND-503T_04.gif
Dimensions and names of each part (dimension unit [mm])
ND-503T_05.gif
Purpose
Neutralization of static electricity from mounters, test handlers, and other high-speed transport parts
Prevents dust from adhering to optical components
Gentle wind high-speed static elimination for small parts
Spot neutralization in clean environments
Static electricity removal in the high temperature chamber of the test handler (special heat-resistant specifications)
ND-503T_02.gif
