Wide range electrostatic sensor (KS-2100) kasuga E.W

Features
The amplifier (drive circuit) is built into the detector, making it inexpensive and compact.
Static electricity monitoring systems, which were previously expensive, can now be built inexpensively.
The measurement range can be changed using a switch, allowing measurement of a wide range from low potential to high potential.
The detector is equipped with a fault indicator LED, which can output to the outside.
Purpose
Monitoring static electricity in the flat panel display production process.
Monitoring the charge on semiconductor wafers.
Monitoring the amount of static electricity during handling of LSIs and transport of printed circuit boards.
specification
Model KS-2100
Detection Method Vibration type surface potential sensor
Measurement range Range(1) ±1 to ±2000V
Range(2) ±0.01 to ±20.00kV
Analog Output 0 to ±5 V
Measurement accuracy ±10%
Measurement Reference Distance Range (1) 10mm
Range (2) 50mm
alarm Detection sensor failure LED display, external output
power supply DC12～24V±5%
environment Temperature: 0 to 40°C, humidity: 65% or less (no condensation)
mass Approx. 100g (excluding cable)
accessories Dedicated cable 5m (maximum 100m possible)
Dimensions and names of each part (dimension unit [mm])
KS-2100_02.gif