This is a dedicated benchtop press model ultrasonic welding machine suitable for welding small ~ medium-sized workpieces at low loads and for direct welding of ultrasonic horn contact surfaces. A variety of welding modes and digital constant amplitude control ensure stable welding quality. In addition to panel operation, it can also display graphs of the welding status and check the yield in conjunction with the welding management software. It can be used in a wide range of applications, including transfer welding of molded parts, direct welding of sheets and nonwovens, inserts, spots, piercings, and gate cutting. Optionally, it can also be used for industrial network communications.
2 Product Features
・Combination of
press types ・Industrial network support (EtherNet/IP, CC-Link IE, CC-Link) ・Bluetooth communication support
・Load control with load cell (S-type) ・Subduction control with linear encoder (S-type)
– Stability
of welding by digital constant amplitude control, combination of various welding
modes, memory of welding conditions and storage of welding results
3. Product Details
S Type Type B
Oscillation Control Time (1ms resolution) Energy
(0.001J resolution) Peak
power (1W resolution) ● ●
Subduction (1 μm resolution) ● –
AND/OR Combination Control ● ●
Continuous Oscillation – –
NG items Time, energy, peak power ● ●
Subduction, Load, Retention Subduction, Total Subduction ● –
Holding time, total distance ● ●
Error judgment Speed, distance, descent time, air pressure Speed, distance, descent time
Retention Control Settings time, subduction AND/OR Time only
Welding Management Software J-Tool
S Type
Welding management at real load with load cells
By directly detecting the load value and reflecting it in the welding conditions, it is possible to set clear welding conditions and achieve stable quality control.
Subduction management with linear encoders.
It is equipped with a linear encoder with a resolution of 1 μm, allowing for more detailed numerical setting of the weld sinking amount. In addition, by selecting subduction control starting from the scale origin, it is suitable for applications where uniformity of product height after welding is achieved.
Setting of low-load welding conditions
Since it is equipped with a self-weight balancing mechanism as standard, it is possible to set the welding conditions at low loads. The press works responsively, even under low load conditions, reducing cycle times.
Type B
Excellent cost performance with simple configuration
The adjustment of the pressing force is a simple configuration performed by the regulator. The adjustment of the oscillation start position is based on the standard installation of two types of distance numerical input or automatic detection system, so there is no need for complicated adjustment work when replacing the stage.
Combination of press equipment options
Combination of press unit configurations to suit your application
Combination of press equipment options
Common features
Frequency Automatic Tracking Control with Digital PLL.
It adopts an automatic tracking method of oscillation frequency through high-speed and high-performance digital signal processing to achieve stable and reliable oscillation control.
Frequency search function
The optimal oscillation frequency according to the tool horn and the operating environment is automatically searched and set by the oscillator panel operation and external signals. You can also set the frequency of the oscillation start arbitrarily.
Versatile Welding Modes Combination
Single or combined control of time, energy, peak power and subduction (AND/OR control) is possible. In addition, welding control is possible through various mode settings such as continuous oscillation. (The configurable modes vary depending on the model)
Memory of welding conditions and storage of welding results
Up to 32 different welding conditions can be stored inside the oscillator. In addition, more than 6.5 million welding results can be stored.
Industrial network ready
Conventional external I/O can be selected, but by utilizing industrial networks such as EtherNet/IP, CC-Link IE, and CC-Link, it contributes to improving productivity by reducing wiring and centralizing data management.
Realization of wiring saving
産業用ネットワークによる省配線化のイメージ
Increased productivity
産業用ネットワークによるデータ一元管理のイメージ
Welding stability with digital constant amplitude control.
By keeping the amplitude of the tool horn constant under load, it is possible to improve the stability of the welding and caulking and reduce the welding time. It is also possible to adjust the behavior of the amplitude by means of a digital control.
Image of the effect
デジタル定振幅制御による溶着の安定性イメージ
Versatile protection
Various anomaly detection functions protect the oscillator and the vibrating unit.
Maintenance with digital parameterization
By eliminating analog adjustments inside the oscillator, it is ready for quick maintenance service.
VFD User Interface
The display languages are Japanese, English, and Chinese.
