Product lineup
Solid Carbide 90° Front Chamfering End Mill
Model No.
Non-coating type Model No.
Coating type Tip diameter
D Effective blade length
K Number of flutes Shank diameter
DS Full length
L
TCM90-3 TCM90C-3 0.5 1.25 3 3 40
TCM90-4 TCM90C-4 0.5 1.75 3 4 50
TCM90-6 TCM90C-6 0.75 2.625 5 6 60
TCM90-8 TCM90C-8 1.25 3.375 5 8 60
TCM90-10 TCM90C-10 2.5 3.75 7 10 70
TCM90-12 TCM90C-12 2.5 4.75 7 12 70
TCM90-10-11S TCM90C-10-11S 4 3 11 10 70
TCM90-12-11S TCM90C-12-11S 4 4 11 12 70
Recommended cutting conditions
Work material Aluminum alloy General steel Stainless steel Titanium alloy Heat resistant alloy
Cutting speed
(m/min) 85~175 40~90 30~60 25~55 20~45
Shank diameter / DS Feed per tooth
(mm/tooth) Feed per tooth
(mm/tooth) Feed per tooth
(mm/tooth) Feed per tooth
(mm/tooth) Feed per tooth
(mm/tooth)
φ3. / φ4. 0.01～0.05 0.025～0.065 0.02～0.06 0.025～0.05 0.02～0.04
φ6. / φ8. 0.015～0.055 0.02～0.06 0.015～0.055 0.02～0.055 0.01～0.05
φ10. / φ12. 0.015～0.055 0.015～0.055 0.01～0.05 0.02～0.045 0.01～0.035
Cutting speed
(m/min) 150～305 100～225 90～180 75～165 65～150
φ10. / φ12.(11S) ～0.03 ～0.035 ～0.03 ～0.025 ～0.035
Chamfer width at one time ～0.3DS ～0.15DS ～0.2DS ～0.15DS ～0.15DS
*Since the recommended cutting conditions are calculated by us, fine adjustment is required on the material, work condition, processing machine, etc.
*Recommended cut direction : Down cut
*It is recommended to use “oil-based coolant / water-soluble coolant” during processing.
*Depending on the material, work condition, processing machine, etc., cut in several times.
*In order to suppress the occurrence of “tool damage / chatter / burr etc.,”pay attention to “clamp / tool runout of machining work”.
*If you want to increase the surface roughness, set a low feed amount per blade or a small cut chamfer amount.
*When chamfering holes by thrusting, set the cutting speed low.
*If the amount of protrusion is long, set the condition low.
Recommended type
Aluminum alloy General steel Stainless steel Titanium alloy Heat resistant alloy
Non-coating type ◎ △ △ ○ ×
Coating type ○ ○ ◎ ◎ ○
Product video
