This 6W Induction AC Gear Motor is an efficient, compact and reliable small motor suitable for a wide range of industrial and household applications.Motor frame 60mm x 60mm making it easy to install in space-constrained environments. It can be used in voltages ranging from single-phase 110V to three-phase 220V, and is highly adaptable to meet the needs of different power systems.
Equipped with capacitors between 0.8 and 3.5uf to ensure smooth and efficient operation of the motor. Its speed is based on the asynchronous speed of the motor, which is 1200 revolutions per minute (r/min) at 50Hz and 1450 revolutions per minute (r/min) at 60Hz, which can meet the speed requirements in different working environments.
Due to its high efficiency and reliability, this motor is suitable for a variety of equipment and application scenarios, including automation equipment, conveyor belts, packaging machinery and printing equipment. It can still provide sufficient power under low power consumption and is an ideal drive choice for energy-saving equipment. The use of high-quality materials and precision manufacturing processes gives the motor durability and stability, reducing maintenance costs and downtime.
Specs Continuous Rating
| Model·Type
Lead Wire Type |
Output
power W |
Voltage
V |
Frequency
Hz |
Current
A |
Starting
Torque mN.m |
Rated
Torgue mN,m |
Rated
Speed r/min |
Capacitor
μF |
|
| Pinion Shaft | Round Shaft | ||||||||
| 2IK6GN-A | 2IK6A-A | 6 | 1ph 100 | 50 | 0.240 | 55 | 48 | 1200 | 3.5 |
| 60 | 0.250 | 50 | 40 | 1450 | |||||
| 2IK6GN-E | 2IK6A-E | 6 | 1ph 110 | 60 | 0.160 | 40 | 40 | 1450 | 2.0 |
| 1ph 120 | 0.180 | ||||||||
| 2IK6GN-C | 2IK6A-C | 6 | 1ph 220 | 50 | 0.130 | 50 | 48 | 1200 | 0.8 |
| 1ph 230 | 0.140 | 40 | 1450 | ||||||
| 2IK6GN-H | 2IK6A-H | 6 | 1ph 220 | 60 | 0.130 | 55 | 40 | 1450 | 0.8 |
| 1ph 230 | 0.140 | ||||||||
| 2IK6GN-S | 2IK6A-S | 6 | 3ph 220 | 50 | 0.076 | 85 | 48 | 1200 | |
| 60 | 0.065 | 70 | 40 | 1450 | |||||
| 2IK6GN-S3 | 2IK6A-S3 | 6 | 3ph 380 | 50 | 0.044 | 85 | 48 | 1200 | |
| 60 | 0.038 | 70 | 40 | 1450 | |||||
When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.
Note:”-A”it means the voltage 110V,the assembly capacitor vaule it is according the labe.
Type
Motor
| Type | Model | |
| Pinion Shaft | Round Shaft | |
| Lead
Wire Type |
2IK6GN-A | 2IK6A-A |
| 2IK6GN-E | 2IK6A-E | |
| 2IK6GN-C | 2IK6A-C | |
| 2IK6GN-H | 2IK6A-H | |
| 2IK6GN-S | 2IK6A-S | |
| 2IK6GN-S3 | 2IK6A-S3 | |
Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
|
Long Life ·Low Noise |
2GN□K |
3、3.6、5、6、7.5、9、10、
12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 2GN10XK(Decimal Gearhead ) | ||
Enter the gear ratio in the box (□)within the model name
Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
Decimal Gearhead
Can be connected to GN pinion shaft type
Weight:0.2kg
Formal Dimension Of Capacitor
| Model |
Capacitor Model |
L |
W |
H |
|
| Pinion Shaft | Round Shaft | ||||
| 2IK6GN-A | 2IK6A-A | ZD35CFAUL | 38 | 19.5 | 31 |
| 2IK6GN-E | 2IK6A-E | ZD20CFAUL | 36 | 15.0 | 25 |
| 2IK6GN-C | 2IK6A-C | ZD08CFAUL | 36 | 10.5 | 20 |
Note: Conventional capacitor is a lead wire type.Inserted 187#is optional
Wiring Diagram
The direction of motor rotation is as viewed from the shaft end of the motor.CW represents the clockwise direction, while CCW represents the counterclockwise direction.
The Name indicated in the list is the pinion shaft type, also valid for the equivalent round shaft type.
| 2IK6GN-A、2IK6GN-E、2IK6GN-C、2IK6GN-H | 2IK6GN-S(S3) | ||
| Clockwise(CW)
|
Anti-clockwise(CCW)
|
Clockwise(CW)
|
|
Note:
Change the direction of single-phase motor rotation only after bringing the motor to a stop.
If an attempt is made to change the direction of rotation while the motor is rotating, the motor may ignore the reversing command or change its direction of rotation after some delay.
Gear Motor-Torque Table
Gearhead and mid-gearbox can be sold separately.
Enter the gear ratio in the box (□)within the model name.
The colored background □ indicates the same rotating direction of the motor while the rotating direction of others is opposite.
The speed is calculated by dividing the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10)between the gearhead and motor. In that case, the permissible torque is 3N-m.
Allowance Torque Unit: Upside(N.m)/ Belowside(kgf.cm)
| Type
Motor/Gearhead |
Gear Ratio | 3 | 3.6 | 5 | 6 |
7.5 |
9 | 10 |
12.5 |
15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 | |
| Speed r/min | 50Hz |
500 |
417 |
300 |
250 |
200 |
166 |
150 |
120 |
100 |
83 | 75 | 60 | 50 | 41 | 37 | 30 | 25 | 20 | 16 | 15 |
12.5 |
10 | 8.3 | 7.5 | |
| 60Hz |
600 |
500 |
360 |
300 |
240 |
200 |
180 |
144 |
120 |
100 | 90 | 72 | 60 | 50 | 45 | 36 | 30 | 24 | 20 | 18 | 15 | 12 | 10 | 9 | ||
|
2IK6GN-A 2IK6GN-E 2IK6GN-C 2IK6GN-H 2IK6GN-S 2IK6GN-S3 |
2GN□K |
50Hz |
0.12 |
0.14 |
0.19 |
0.23 |
0.29 |
0.35 |
0.39 |
0.49 |
0.58 |
0.70 |
0.75 |
0.88 |
1.10 |
1.30 |
1.39 |
1.60 |
1.90 |
2.40 |
2.90 |
3.00 |
3.00 |
3.00 |
3.00 |
3.00 |
|
1.22 |
1.43 |
1.94 |
2.35 |
2.96 |
3.57 |
3.98 |
5.00 |
5.92 |
7.14 |
7.65 |
8.98 |
11.2 |
13.3 |
14.2 |
16.3 |
19.4 |
24.5 |
29.6 |
30.0 |
30.0 |
30.0 |
30.0 |
30.0 |
|||
| 60Hz |
0.10 |
0.12 |
0.16 |
0.19 |
0.24 |
0.29 |
0.32 |
0.4 |
0.49 |
0.58 |
0.62 |
0.73 |
0.88 |
1.10 |
1.15 |
1.30 |
1.60 |
2.00 |
2.40 |
2.60 |
3.00 |
3.00 |
3.00 |
3.00 |
||
|
1.02 |
1.22 |
1.63 |
1.94 |
2.45 |
2.96 |
3.26 |
4.18 |
5.00 |
5.92 |
6.32 |
7.45 |
8.98 |
11.2 |
11.7 |
13.3 |
6.3 |
20.4 |
24.5 |
26.5 |
30.0 |
30.0 |
30.0 |
30.0 |
|||
To Allow The Hoisting Of The Load Alow Axial Load
|
Motor (Round shaft)→P215 |
| Gearhead→P215 |
J Permissible Load Inertia J For Gearhead
→215 page→P215
Dimensions (Unit mm)
Mounting screws are included with the gearhead.
Lead Wiring Type
Weight: Motor:0.75kg / Gearhead:0.4kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| 2IK6GN-A
2IK6GN-E 2IK6GN-C 2IK6GN-H 2IK6GN-S 2IK6GN-S3 |
2GN□K | 3~200 | 41.5 |
