A thorough explanation of the capabilities of the U-550 tensiometer!
Watch the video here


Analyzing sound waves and measuring belt tension non-contact
The microphone captures the sound waves (natural frequencies) generated from the belt and processes it by computer.
Anyone can easily and accurately measure belt tension.
Measurement procedure
U-550
A new model evolved from on-site requests has been introduced.
-
Improved measurement sensitivity

Frequency bands that were difficult to measure with previous models have been enhanced. The range settings have been improved for easier removal. By adding a LOW range switching function even at low frequencies, sensitivity has been improved at low tension and long spans. It enables accurate and stable measurements across various applications.
-
Reduced measurement time

Significantly reduces the time from when the belt is flipped to when the tension value is displayed. Continuous measurement can also be performed stress-free, contributing to increased productivity.
-
Uses OLED screen

The adoption of an organic EL screen ensures clear visuals even in low-light measurement environments. Additionally, it has become possible to recognize the screen from angles in cramped measurement environments.
-
Enhanced manual installation features

You can assign any name to the 40 measurement conditions that can be recorded inside the main unit.
*Operation required on a PC.
Development of environmentally friendly products
At Gates Unitta Asia, we are actively engaged in environmental conservation, developing alternative technologies that eliminate hazardous substances and procuring parts not only for toothed belts and pulleys but also for the sonic belt tensiometer U-550, ensuring compliance with the RoHS2 directive.
U-550 Specifications
| Model Name | U-550 |
|---|---|
| Product Number | TM-550 |
| Measurement Range | 10Hz ~ 5,000Hz |
| Power Supply | Alkaline batteries (AAA ×, 2 pieces) |
| Dimensions | Width 59 × Thickness 26 × Length 160mm |
| Quality | 120g |
| Accessories | Flex arm microphone (model number: TM-AMM) carrying case, alkaline batteries (2 AAA batteries× *USB cable not included. |
Principle of Measuring Belt Tension
Overview
When a shock is applied to the belt stretched between pulleys, the belt initially vibrates in irregular waveforms containing high-frequency and impact components, then transitions to the belt-specific regular waveforms. Because these vibrations decay quickly, combined with the occurrence of vibrations of higher-order components, it has been difficult until now to capture the period of the fundamental waveform. However, this was achieved through the development of proprietary data processing that captures vibration frequencies using microcomputers. Formulas built into the program display the exact tension values.
(Patent: No.1931781)

Expression
Tension value: To = 4 × M × W × S² ×f² × 10⁻⁻⁻N)
M: Unit mass (for belts: g/1m length ×per 1mm width; for wires: g/1m length) W: Width (for belts: input belt width in mm; for wires: enter “1” representing “1”) S: Measured span length (mm) f: Belt primary natural frequency measured by sensor (Hz)
Basic Functions of Sonic Tensometer

-
High-sensitivity microphone
Comes standard with a high-sensitivity microphone in the low frequency range. It is especially effective with long spans on large belts.

-
Output to PC
Measurement results stored in the internal memory of the device can be output to a computer with a single touch via a USB cable.
-
Pre-installation of unit mass values
By simply specifying the belt type, we pre-installed data for 69 types of Gates Unitta Asia belts so that unit mass values can be displayed instantly
-
Wide measurement frequency range
With three range switches, it supports measurements across a wide frequency range from 10 to 5000Hz.
-
Equipped with auto-trigger function
Once you press the “MEASURE” button, it features an auto-trigger function that allows continuous measurement simply by flicking the belt.
-
Suitable for measurement in confined spaces
The sensor unit (microphone) is an ultra-small single microphone, allowing easy measurement even in confined spaces. Four types of microphones are available as optional accessories. For details, please check the back cover.
-
Large Capacity Built-in Memory
Equipped with a memory function inside the main unit, it can record 500 measurement results and 40 different measurement conditions.
-
Automatic cancellation of dark noise
From power-on until pressing the “MEASURE” button, the surrounding noise environment is regularly measured and the microphone sensitivity is automatically adjusted. Pressing the “MEASURE” button locks the microphone sensitivity.
-
Equipped with a function for judging measurement results
You can set upper and lower limits for determining measurement results under 40 different measurement conditions that can be recorded inside the main unit.
* Operation required on a PC. -
Auto power-off function
It features an auto power-off function that automatically cuts off the power about 5 minutes after the last measurement, preventing unnecessary battery waste caused by forgetting to power off.
●ISO9000 Inspection report and traceability certificate required for acquisition can be issued.
Optional microphone
(can also be used with old U-508, U-507, U-505, U-305, U-303). )

Horizontal Arm Microphone
(Model Number: TM-YOKO)The horizontal arm microphone has a microphone on the side, allowing measurements even in narrow spaces between the back of the belt and the machine
(Thickness 10.0mm× Width 20mm / Total length 170mm)
Long-arm microphone
(model number: TM-LONG2)A type with a longer arm (350mm length) compared to the standard microphone (total length 170mm).
(Microphone outer diameter φ 12.5mm / Total length 350mm)
Corded Microphone
(Model Number: TM-COM)A 1-meter-long corded microphone capable of measuring the belt located at the back of the machine, which was difficult to measure with standard microphones.
(Microphone outer diameter φ 12.5mm / Total length 1m)
Electromagnetic Sensor
(Model Number: TM-DGS)Since the sensor captures changes in magnetic force instead of sound waves, it can measure steel wires, steel belts, and similar materials. Even in environments prone to noise (dark noise) with rubber belts that are not normally measurable with microphones, applying a thin magnetic material (enough to not affect natural frequencies) makes measurement possible.
(Total length 1m)
(Common specifications / Measurable frequency range: 10Hz to 5,000Hz, RoHS2 compliant)
Options

(RoHS2 compliant)- Tensiometer Testing Device (Model Number: TM-OS1)Frequency calibration devices for the U-550, U-508, U-507, U-505, U-305, and U-303 series. It can emit five types of vibrations (sine waves): 25, 90, 500, 2K, and 4KHz.
| Features | Transmission frequency | Frequency angle | Output Waveform | skew rate | Output voltage |
|---|---|---|---|---|---|
| Dedicated device (vibration transmitter) for verifying the frequency of sonic belt tension meters | Five points: 25Hz, 90Hz, 500Hz, 2kHz, and 4kHz | Below 0.1% | sine wave | Within 1% | 20mV(P-P) |
| Current Consumption | electric current | Dimensions | Quality | Usage Environment | |
| 50mA (output) 10mA or less (no output) | Batteries (AA type× 4 pieces) AC adapter (DC6V 50mA) | Width 155× Height 46× Depth 134mm | 300g | -10~50°C 80% or less (no condensation) | |
Precautions for Use




