<php _e('Click to Call','call-now'); ?>

0865 735 110

Tin tức

TRUSCO Solid Carbide Coating Drill

Posted on by admin

TRUSCO Solid Carbide Coating Drill

High-quality cemented carbide drills with the entire manufacturing process carried out in Japan.

1. Excellent tool life

PVD coating (Ti Al N coating) with an optimised balance of hardness, oxidation resistance and chipping resistance for excellent tool life.

Workpiece material: S50C – Tool diameter: ø6 (TRP2D0600S06) – Drilling depth: 12 mm (stop)

Cutting conditions: Vc = 80 m/min, f = 0.2 mm/rev

Tool protrusion: 26 mm

Water-soluble cutting oil (external lubrication)

2. Increased production efficiency

It can cut two to five times faster than HSS drills, which significantly increases work efficiency.

Can be fitted to a wide range of machine tools, including machining centres and lathes. Less chipping and easy handling.

3. Quality control by lot number

Each drill is individually stamped with a lot number and quality-controlled.

Quality checks are carried out at the cemented carbide material stage, where the drill is made from, and several intermediate dimensional inspections are carried out before the product is manufactured, with careful quality checks carried out at each stage of the process.

Only products that have passed the strict inspections at each stage of the process are inscribed with a lot number.

4. Full range of sizes (111 product numbers in total)

A line-up of drill sizes from 1.0 mm to 12.0 mm in 0.1 mm increments to meet diverse needs.

 

admin

.
.
.
.