0865 735 110

Ultrasonic direct detection sensor UB100-F77-E2-V31

Ultrasonic direct detection sensor UB100-F77-E2-V31

  • Miniature design
  • Program input
  • Degree of protection IP67
  • Switching status indicator, yellow LED

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

English


Datasheet excerpt: Technical data of  UB100-F77-E2-V31

Product Description
Ultrasonic direct detection sensor
General specifications
Sensing range 10 … 100 mm
Adjustment range 30 … 100 mm
Dead band 0 … 10 mm
Standard target plate 20 mm x 20 mm
Transducer frequency approx. 400 kHz
Response delay ≤ 50 ms
Limit data
Permissible cable length max. 300 m
Indicators/operating means
LED yellow switching state and flashing: Teach-In
Electrical specifications
Rated operating voltage 24 V DC
Operating voltage 20 … 30 V DC , ripple 10 %SS ; 12 … 20 V DC sensitivity reduced to 90 %
No-load supply current ≤ 20 mA
Time delay before availability ≤ 150 ms
Input
Input type 1 program input
Level low level : 0 … 0.7 V (Teach-In active)
high level : UB or open input (Teach-In inactive)
Input impedance 16 kΩ
Pulse length ≥ 3 s
Output
Output type 1 switch output PNP, NO
Rated operating current 200 mA , short-circuit/overload protected
Voltage drop ≤ 2 V
Repeat accuracy ± 1 mm
Switching frequency   10 Hz
Range hysteresis typ. 2.5 mm
Off-state current ≤ 0.01 mA
Temperature influence 0.17 %/K
Compliance with standards and directives
Standard conformity
Standards EN IEC 60947-5-2:2020
IEC 60947-5-2:2019
Approvals and certificates
UL approval cULus Listed, Class 2 Power Source
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -10 … 50 °C (14 … 122 °F)
Storage temperature -40 … 85 °C (-40 … 185 °F)
Shock resistance 30 g , 11 ms period
Vibration resistance 10 … 55 Hz , Amplitude ± 1 mm
Mechanical specifications
Connection type M8 x 1 connector , 4-pin
Degree of protection IP67
Material
Housing Polycarbonate
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam
Installation position any position
Mass 10 g
Tightening torque, fastening screws max. 0.2 Nm
Dimensions
Height 31 mm
Width 12 mm
Length 23 mm
Factory settings
Output Switching point: 100 mm

.
.
.
.