GLO-LIGU Spinning Holder Product Information
GLO-LIGU Spinning Holder is a common ER collet type, side lock type, It has a better holding force and anti-vibration damping system than the hydraulic type, back-pull type, and heat shrink type, and can be expected to improve the surface roughness after processing.
The GLO-LIGU Spinning Holder has an internal worm gear & wheel (1:16 gear ratio) for quick and easy and powerful tightening with just a hex wrench. In addition, the anti-vibration damping system reduces vibration and contributes to longer tool life. In addition, it is designed with a seal to prevent liquid leakage from the inside and outside, so you can use it with confidence.
Balance Accuracy : 2.5D / 3.0μm
Dynamic Balance Characteristics : G2.5 / 20,000rpm
GLO-LIGU Spinning Holder prolongs tool life and effectively reduces tool costs, It reduces the failure rate of other related equipment and contributes to the improvement of processing efficiency.
In addition to standard products, we also manufacture custom-made products by receiving drawings.
If you have any questions or quotations, please contact us.
Download the catalog from Ipros Browse
the catalog
GLO-LIGU Spinning Holder How to Use
(1) Insert the tool into the collet and adjust the length of the tool.
In the case of a collet with pins, tighten the pins after adjusting the length of the tool to secure them.
* Clean the tool holder thoroughly before inserting the collet into the tool holder.
(2) Insert the collet into the tool holder and screw it clockwise to fix it.
* In order to obtain accuracy, holding power, etc., clean the inner diameter of the tool holder and collet when replacing the tool.
(3) Insert a torque wrench into the side of the tool holder and tighten it with a torque wrench. (clockwise)
* In order to tighten with the appropriate torque, use GLO-LIGU’s original torque wrench.
* When using, please use it according to the hexagonal hole.
Note: When tightening, check the ▲ mark on the torque wrench, and if the ▲ mark overlaps, Tighten until you do. If it is overtightened, it will fail.
List of major processing equipment
model Manufacturer’s name Maximum dimensions of the workpiece Number
2-axis internal grinding machine Toyo Seiki 100×125 1
CNC Machining Center Made in Taiwan 850×500×450 15
CNC Machining Center (Milling) Made in Taiwan 500×400×240 18
CNC lathes (milling) Okuma 600 / 400 3
Swiss-type CNC automatic lathe Star Micronics φ32 1
High-precision external grinding machine Made in Taiwan 150×500 4
High-precision internal grinding machine Made in Taiwan 100×125 3
Surface grinding machine Made in Taiwan 120×500 1
List of major inspection facilities
model Maximum Dimensions Number
3D coordinate measuring instrument 2
Projector 300×200 1
Surface roughness measuring instrument 1
Snap Gauge 0-50 1
Digital microscope 5
