Power Controller PA-200

---

Power Controller
PA-200

 

– Precise control, applicable for inductive loads (H series) – Noiseless – ideal for computer lines (Z series) – Also available for 3-phase control – Model – Dimensions – Spec

Precise control, applicable for inductive loads (H series)

PA-200-H series is a power controller with a phase control system. Precise control with continuous power adjustment. Applicable to inductive loads such as motors and solenoids.

Noiseless – ideal for computer lines (Z series)

PA-200-Z series is a power controller with a zero-cross frequency division system. This means that extremely low switching noise is generated, so there are no harmful effects in peripheral computer lines.

Also available for 3-phase control

A range of products with 3-phase control can be provided. For the 3-phase control system, zero-cross frequency division control system is not available.

Model

PA-2 – , Rated current 15 15A 30 30A 60 60A 100 100A 150 150A Control system H Phase control (Single-phase) Z Zero-cross frequency division control (Single-phase) H3 Phase control (3-phase) Option CC Constant current control (with voltage limiter) CV Constant voltage control (with current limiter) AL Peak over-current alarm

Dimensions

PA-215-H, PA-230-H PA-260-H PA-2100-H PA-2150-H PA-215-H3, PA-230-H3 PA-260-H3 PA-2100-H3 PA-2150-H3

Spec

Control System	Control system Specify one from the following. -Single-phase control system (H series) -Zero-cross frequency division control sytem (single-phase) (Z series) -3-phase control system (H3 series) (For 3-phase control system, zero-cross frequency division system is not available.)
Rating	Number of phase Specify one from the following. -Single-phase -3-phase Rated current 15A, 30A, 60A, 100A, 150A Input signal 4 to 20mA DC, Relay contact input, Manual setting, 0.8 to 4V DC Rated voltage 100/110V AC, 200/220V AC 50/60Hz common use For 150A, specify one from the following. -100/110V AC 50/60Hz (Impossible to designate for 3-phase.) -200/220V AC 50/60Hz Output adjustment range 0 to 98% of rated voltage Gradient adjustment range 0 to 100% (DAMP) Voltage fluctuation range Within 10% of rated voltage Soft-up For only Single-phase control system (H series), 0.2 to 5 sec, variable (Default: 0.2 sec)
General Structure	External dimensions Model W x H x D (mm) Single-phase (H, Z series) 3-phase PA-215 60x178x152 121x260x197 PA-230 60x178x152 121x260x197 PA-260 124x228x157 280x235x193 PA-2100 155x228x157 378x235x193 PA-2150 185x345x175 378x345x210 Mounting Surface mounting
Insulation, Dielectric Strength	External dimensions Model W x H x D (mm) Single-phase (H, Z series) 3-phase PA-215 60x178x152 121x260x197 PA-230 60x178x152 121x260x197 PA-260 124x228x157 280x235x193 PA-2100 155x228x157 378x235x193 PA-2150 185x345x175 378x345x210 Mounting Surface mounting
Heating Value	Heating value Single-phase (H, Z series) Output current 15A 30A 60A 100A 150A Internal heating value 22W 36W 60W 100W 175W 3-phase Output current 15A 30A 60A 100A 150A Internal heating value 75W 114W 186W 300W 430W
Other	Ambient temperature Operating temperature: 0 to 60 (allowable current decreases at 40 or higher) Output decreasing rate: Weight Model Weight Single-phase (H series) Single-phase (Z series) 3-phase PA-215 1.1kg 1.0kg 2.5kg PA-230 1.1kg 1.1kg 3.0kg PA-260 3.0kg 3.0kg 6.0kg PA-2100 3.5kg 3.5kg 9.0kg PA-2150 6.0kg 6.0kg 12.0kg Accessories Instruction manual 1 copy