| Yaskawa Servo Motors Break | 200 V | ||||||||||
| Yaskawa Servo Motor SGM7G | 03A | 05A | 09A | 13A | 20A | 30A | 44A | 55A | 75A | 1AA | 1EA |
| Time Rating | Continuous | ||||||||||
| Thermal Class | UL: F, CE: F | ||||||||||
| Insulation Resistance | 500 VDC, 10 MΩ min. | ||||||||||
| Withstand Voltage | 1,500 VAC for 1 minute | ||||||||||
| Excitation | Permanent magnet | ||||||||||
| Mounting | Flange-mounted | ||||||||||
| Drive Method | Direct drive | ||||||||||
| Rotation Direction | Counterclockwise (CCW) for forward reference when viewed from the load side | ||||||||||
| Vibration Class*1 | V15 | ||||||||||
|
Surrounding Air Tem- perature |
0°C to 40°C (60°C max.)*4 | ||||||||||
| Surrounding Air Humidity | 20% to 80% relative humidity (with no condensation) | ||||||||||
|
Installation Site |
• Must be indoors and free of corrosive and explosive gases.• Must be well-ventilated and free of dust and moisture.
• Must facilitate inspection and cleaning. • Must have an altitude of 1,000 m or less. (With derating, usage is possible between 1,000 m and 2,000 m.)*5 • Must be free of strong magnetic fields. |
||||||||||
|
Storage Environment |
Store the Servomotor in the following environment if you store it with the power cable disconnected.Storage temperature: -20°C to 60°C (with no freezing)
Storage humidity: 20% to 80% relative humidity (with no condensation) |
||||||||||
|
Impact Acceleration Rate at Flange |
490 m/s2 | ||||||||||
| Number of Impacts | 2 times | ||||||||||
| Vibration Resis-tance*3
Vibration Acceleration Rate at Flange |
49 m/s2 (24.5 m/s2 front to back) | 24.5 m/s2 | |||||||||
| SGD7S- | 3R8A | 7R6A | 120A | 180A | 330A | 470A | 550A | 590A | 780A | ||
| SGD7W- SGD7C- | 5R5A*67R6A*6 | 7R6A | – | ||||||||
