| Configuration of Programmable Controller |
When delivered, check to confirm that the following items you have ordered are included.
Consult us regarding the wiring-completed (customized) products.
| Contents of Package |
|
Model
|
Q’tity
|
| Touch Screen |
1 |
| Temperature control module (*1) |
1 to 9 (*2) |
| Connection cable (between Touch Screen – WCL-13A) |
1 |
| Connection cable (between WCL-13As) |
(*3) |
| Switching power supply 24 V DC |
1 |
| Cable for front mounted USB port |
1 |
| EX module |
1 |
| MIL socket connector harness |
1 |
| USB memory stick |
1 |
| Socket (*1) |
(*3) |
(*1) Specify one when ordering. When WCL-13A units are connected, their specifications should be the same.
(*2) For Instrument Number setting for the WCL-13A, start from 1 (one) and progress chronologically.
(*3) When multiple WCL units are ordered, corresponding amount of cables and sockets are included. |
| Configuration Example |
See the PDF data of configuration example. |
|
|
|
| Control Performance |
| Control output |
| Relay contact output 1a |
Control capacity: 3 A 250 V AC (resistive load)
1 A 250 V AC (inductive load cos=0.4)
Electrical life: 100, 000 cycles |
| Non-contact voltage output |
12 V DC 15 % (for SSR drive)
Max 40 mA DC (short circuit protected) |
| Direct current output |
4 to 20 mA DC
Load resistance: Max 550  |
|
|
|
|
| Program Performance |
| Number of Patterns |
100 |
| Number of Steps |
100 |
| Number of Repetition |
0 to 99 times |
| Program Time Range |
0 to 99 min 59 sec/Step or 0 to 99 hr 59 min/Step |
| Time Setting Accuracy |
Timer accuracy (65 sec/month at 10 to 40  ) |
| Wait Block Parameters |
Setting range: 0 to 1000 (Decimal point depends on the input range.) |
| Block Setting |
PID block (10 types), Time signal block (16 types), Wait block (10 types), Alarm block (10 types) |
| Time Signal Output |
20 points (Open collector output) |
| Alarm Output |
4 points (Open collector output) |
| Pattern End Output |
1 point (Open collector output) |
| External Operation Input |
Pattern selection (Selects 1 to 100 pattern numbers via BCD code, BCD 8-point input)
Start, Stop, Advance, Fast (speeds up program progression.) |
|
|
|
| General Structure |
| Mounting |
Touch Screen: Flush
Temperature control module: DIN rail |
| External Dimensions |
Touch Screen: W167.5 x H135 x D78 mm
Temperature control module: W30 x H88 x D108 mm (including socket) |
| Weight |
Touch Screen: 1.0 kg or less
Temperature control module: Approx. 200 g (including socket) |
|
|
|
| Attached Functions |
| Data logging |
SV and output status can be saved on the USB memory stick as a CSV file at a constant cycle. |
| Program patterns SAVE/LOAD |
Program pattern data can be saved to/loaded from the USB memory stick, which results in reduction of setting operations. |
|
|
|
