■ Features
1. TWH series double-acting stop cylinder, thickened rod level type, can effectively improve the ability of the cylinder to resist crashes.
2. Heavy duty bumper cylinder with a fixed shock absorber or adjustable shock absorber, can reliably absorb impact energy.
3. The stop cylinder with lever roller structure is equipped with a locking mechanism device, which can prevent the rocker from rebounding and pushing back the secured object.
4. Various series and specifications of pneumatic stop cylinders are available for customers to choose.
■ How to Order TWH Series Double Acting Stop Cylinder
| TWH: Series code | 50: Drill | 30: Stroke | S: Magnet | K: Stopper |
|---|---|---|---|---|
| TWH: Double acting type TDH: Double acting type with built-in spring TTH: Single acting – Pull type |
20mm 25mm | 15mm | Blank: Without magnet S: With magnet |
L: Stop without shock absorber (non-adjustable shock absorber) K: Stop without shock absorber (Adjustable shock absorber) |
| 32mm | 20mm | |||
| 40mm 50mm 63mm | 30mm | |||
| 80mm | 40mm | |||
| TWM: Double acting type TDM: Double acting type with built-in spring TTM: Single acting type |
50mm | 30mm | K: Plug without shock absorber (Adjustable shock absorber) |
1. When the thread is standard, the code is blank.
2. Cylinder diameter 20mm, 25mm is non-adjustable absorber; Above 32 is adjustable absorber.
■ Specs
| Model | TWH | TWM | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Diameter (mm) | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 50 | |
| Working medium | Clean air (filtered 40um) | ||||||||
| Action type | Double acting, single acting-pull | ||||||||
| Working pressure | Double effect | 0.15 to 1.0 Mpa | |||||||
| Simple pull-effect | 0.25 to 1.0 Mpa | 0.2 to 1.0 Mpa | |||||||
| Guaranteed pressure | 1,5 Mpa | ||||||||
| Working temperature | -20 a 70℃ | ||||||||
| Stroke tolerance | 1 0 |
||||||||
| Shock absorber | Bumper | ||||||||
| Lubrication | Not necessary | ||||||||
| Mounting | Flange | ||||||||
| Ball head type | Stop without shock absorber (non-adjustable shock absorber) |
Stop without damping (adjustable damper) | |||||||
| Port size | M5×0,5 | M8×1,0 | |||||||
* PT thread, G thread and NPT thread available.
■ Application
1. Shock absorber adjustment
① The shock absorber had been adjusted before finishing the cylinder.
② Customer can adjust it if necessary.
③ The steps are as follows
to. Loosen the fixed screw.
b. Rotate the shock absorber to adjust the damping capacity.
c. Tighten the fixed screw.
2. Multiple working position
① If the body is fixed, only to adjust the scotch block, the working direction of the cylinder will be changed.
② For TWG series, by adjusting the position of the flange, the working height can be changed.
3. Work prohibition (Non-shock stop (K))
① This function is used to override the stopping action of the cylinder, and make the workpiece pass easily.
② The steps are as follows
to. Unscrew the flange canceling screw.
b. Place the roller seat down.
c. Fix the canceling screw into the screw hole on the fixed seat and the tail of the canceling screw should be inserted into the hole made in the roller seat.
4. How to use the stop function
① When the shock absorber receives a deep impact, the added impact energy should be avoided. The cylinder without shock absorber cannot be impacted by load, otherwise mechanical failure may be caused.
② The maximum impact kinetic energy acting on the stem cannot exceed the maximum allowable values, otherwise mechanical failure may be caused.
5. Auto-lock
Unusually, when the stop cylinder is operating, the workpiece will bounce back as an effect of the buffer. In order to keep the workpiece stable, we have developed this self-locking device.
■ Dimensions
