Modular Slot MOVIE
MODEL[RH]
■ High rigidity reduces vibration, enabling high feed rates.
■ Reverse taper contouring processing is possible with 3-axis MC.
■ Uses a high-hardness, highly heat-resistant coating for long lifespan.
■ High rigidity allows simultaneous processing of the bottom.
■ Solid head allows for re-polishing and recoating.
Solid Head Part Number
| CODE | Outer diameter ΦD ±0.05 | Blade thickness T ±0.02 | Inner diameter Φd H6 | Number of Blades Z | Maximum Groove Depth |
|---|---|---|---|---|---|
| MSRH-32-0.75R | 32 | 1.5 | 12 | 6 | 3.0 |
| MSRH-32-1.0R | 2.0 | ||||
| MSRH-32-1.25R | 2.5 | ||||
| MSRH-32-1.5R | 3.0 | ||||
| MSRH-40-1.0R | 40 | 2.0 | 13 | 6 | 4.5 |
| MSRH-40-1.25R | 2.5 | ||||
| MSRH-40-1.5R | 3.0 | ||||
| MSRH-40-2.0R | 4.0 | ||||
| MSRH-50-1.0R | 50 | 2.0 | 15.875 | 8 | 6.0 |
| MSRH-50-1.25R | 2.5 | ||||
| MSRH-50-1.5R | 3.0 | ||||
| MSRH-50-2.0R | 4.0 |
Dedicated Clamp Bolt Part Number
| CODE | Compatible Arbor | Screw section M | Inlet diameter ΦD1 | Compatible Head |
|---|---|---|---|---|
| MSB-32 | MS-ST16-150 | M8 | Φ8.5 | MSSH-32-□ MSRH-32-□ |
| MSB-40 | MS-ST20-150 | M10 | Φ10.5 | MSSH-40-□ MSRH-40-□ |
| MSB-50 | MS-ST25-150 | M12 | Φ12.5 | MSSH-50-□ MSRH-50-□ |
*It can also be used with arbors for other companies’ modular systems.
| Compatible Manufacturers | |
|---|---|
| Mitsubishi Materials | Screw-in tool |
| Hitachi Tools | Modular mill |
| Daijet | Modular Head |
| SANDVIK | Modular Colomill |
| SECO | Combi Master Head |
Modular Arba Part Number
| CODE | Overall length: L | Shank diameter ΦD | clamp bolt |
|---|---|---|---|
| MS-ST16-150 | 150 | 16.0 | MSB-32 MSCVB-32 |
| MS-ST20-150 | 20.0 | MSB-40 MSCVB-40 | |
| MS-ST25-150 | 25.0 | MSB-50 MSCVB-50 |
