Series DC7 heavy duty steel pneumatic cylinders offer advanced features like the strong scraper gland assembly, case hardened piston rods and high strength tie rods with rolled threads.
Technical Specifications
| Bore Diameter: | 40 to 150 mm |
| For Fluid Type: | Air |
| Lubricant: | Unnecessary Once lubricating the cylinder, you must lubricate it constantly. |
| Pressure Rating: | 0.05 to 1 MPa |
| Proof Pressure: | 1.5 MPa |
| Operating Speed: | 50 to 500 mm/sec |
| Operating Temperature: | -10 to 60 °C (No freezing) |
| Cushioning Type: | With Cushions on Both Ends |
| Cushioning Stroke Length: | 20 mm (φ40 to φ63), 25 mm (φ80,φ100), 35 mm (φ125,φ150) (Cushion ring length) |
| Thread Tolerance: | JIS 6g/6H |
| Stroke Tolerance: | 0 to +1.0 mm (1 to 250 mm), 0 to +1.5 mm (251 to 1000 mm), 0 to +2.0 mm (1001 to 1500 mm) |
| Mounting Type: | SD, LB, FA, FB, CA, CB, TC |
| Rod End Type: | Rod Eye (T-end), Rod Clevis (Y-end) with Pin |
| Bellows Material: | Nylon Tarpaulin (Standard), Chloroprene, Conex (Semi-standard) |
