DGC-32 Datasheet:
| Stroke | 1 mm … 8500 mm |
| Piston diameter | 32 mm |
| Cushioning | Elastic cushioning rings/plates at both endsPneumatic cushioning, adjustable at both endsShock absorber, hard characteristic curveShock absorber, soft characteristic curve |
| Mounting position | optional |
| Guide | Plain-bearing guideBasic guideRecirculating ball bearing guide |
| Position detection | Via proximity switch |
| Variants | Axis clamping unitProtected recirculating ball bearing guideAdditional slide, standard, on leftAdditional slide, standard, on right |
| Operating pressure | 0.2 MPa … 0.8 MPa |
| Operating pressure | 2 bar … 8 bar |
| Mode of operation | Double-acting |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| CE marking (see declaration of conformity) | To UK EX instructions |
| Explosion protection certification outside the EU | EPL Dc (GB)EPL Gb (GB) |
| Explosion protection | Zone 1 (ATEX)Zone 1 (UKEX)Zone 2 (ATEX)Zone 22 (ATEX)Zone 22 (UKEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 3D |
| Explosion ignition protection type for gas | Ex h IIC T4 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T120°C Dc X |
| Explosion ambient temperature | -10°C <= Ta <= +60°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 – No corrosion stress1 – Low corrosion stress2 – Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Suitable for use with food | See supplementary material information |
| Ambient temperature | -10 °C … 60 °C |
| Cushioning length | 17.5 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 483 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 483 N |
| alternative connections | See product drawing |
| Type of mounting | With accessories |
| Pneumatic connection, clamping unit | M5 |
| Note on materials | RoHS-compliant |
| Material cover | Wrought aluminium alloy |
| Material seals | NBRTPE-U(PU) |
